Values may be entered using any of the following abbreviations. When entering a value a space separating the numerical value and the unit abbreviation is optional. If a value is entered without an abbreviation the default abbreviation for that field will automatically be applied.
Note: Units will be converted automatically to the default for your region after they are entered. Values are stored in saved YM files as Imperial units and converted back on loading the file if needed.
Density
- Gram Per Cubic Millimeter (g/mm³)
- Gram Per Cubic Centimeter (g/cm³)
- Gram Per Milliliter(g/ml)
- Gram Per Liter(g/L)
- Pound Per Cubic Inch (lb/in³)
- Pound Per Cubic Foot (lb/ft³)
Force
- Newton (N)
- Pound Force (lbf, kipf, kip, k)
Length
- Meter (m)
- Yard (yd)
- Foot (ft, ‘)
- Inch (in, “)
Mass
- Gram (g, mg, kg)
- Pound (lb, lbs, lbm)
Pressure
- Pascal (Pa)
- Newton Per Square Meter (N/m²)
- Pound Force Per Square Inch (psi, lb/in²)
- Pound Force Per Square Foot(lb/ft²)
Speed
- Meter Per Second (m/s)
- Meter Per Hour (m/h)
- Kilometer Per Hour (km/h)
- Mile Per Hour (mph)
Torque
- Newton Centimeter (N·cm)
- Newton Meter (N·m)
- Kilogram Force Centimeter (kgf·cm)
- Kilogram Force Meter (kgf·m)
- Pound Force Inch (lbf·in)
- Pound Force Foot (lbf·ft)